作者单位
摘要
战略支援部队信息工程大学信息系统工程学院,河南 郑州 450000
单光子雪崩二极管(SPAD)阵列探测器常被用作空间远距离目标的测距和三维成像。为快速获取光子数据,SPAD阵列探测系统一般选用高重复频率的探测体制。目前,主要采用随机序列对脉冲进行编码的方法来抑制高重复频率引起的距离模糊效应。为了在接收端对阵列像素实现有效区分,而且各周期内的编码波形不相互串扰,需要数量庞大且可保持相互正交的随机编码序列。本文提出了使用混沌序列对SPAD阵列进行编码的思路,并通过分析Lyapunov指数的值域变化,提出了复合型Logistic序列的优化编码方案。为确保阵元间的互扰不会影响最终的探测效果,提出了峰值旁瓣差(PSLD)的概念,并对阵列间互相关积累的影响进行了定量分析。依据峰值旁瓣差对生成的混沌序列进行了筛选,以保证其能够满足所需阵列规模的抗互扰要求。最后给出了具体的编码流程。
探测器 单光子探测阵列 混沌序列 峰值旁瓣差 级联编码 
中国激光
2023, 50(19): 1906004
作者单位
摘要
战略支援部队信息工程大学,河南 郑州 450001
采用单光子雪崩二极管(SPAD)组成的接收阵列,可有效提升接收端的灵敏度,这对于远距离探测成像具有重要应用价值。因成像时间受限,SPAD阵列对于空中移动目标探测的成像结果存在分辨率低、特征信息少、背景干扰噪声多等问题。针对阵列弱成像条件下的目标快速识别问题,通过分析不同空中移动目标的结构运动与位移之间的角度变化特点,提出一种基于SPAD阵列探测的空中运动目标识别方法。该方法有效解决了跟踪探测实时性要求与目标识别准确性之间的矛盾,可以在没有先验信息的条件下完成跟踪和识别任务。为进一步说明基于光流特征的分析方法的优势,以旋翼型无人机、固定翼型无人机以及飞鸟等大小、形状类似的低空飞行目标为例,通过对不同的光流角度分布进行统计分析,在近似离散点的成像条件下实现了以上3类目标的有效识别分类。
测量 SPAD阵列 聚类 光流特征 识别 
光学学报
2023, 43(12): 1212002
Author Affiliations
Abstract
1 School of Electronic Science and Engineering (National Model Microelectronics College), Xiamen University, Xiamen 361005, China
2 Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province (IKKEM), Xiamen 361005, China
3 Melbourne Centre for Nanofabrication, Victorian Node of the Australian National Fabrication Facility, Clayton 3168, VIC, Australia
4 Institute of Materials Research and Engineering, Agency for Science, Technology, and Research (A*STAR) 2 Fusionopolis Way, Innovis 08-03, Singapore 138632, Singapore
5 School of Engineering, RMIT University, Melbourne, Victoria 3001, Australia
As a promising counterpart of two-dimensional metamaterials, metasurfaces enable to arbitrarily control the wavefront of light at subwavelength scale and hold promise for planar holography and applicable multiplexing devices. Nevertheless, the degrees of freedom (DoF) to orthogonally multiplex data have been almost exhausted. Compared with state-of-the-art methods that extensively employ the orthogonal basis such as wavelength, polarization or orbital angular momentum, we propose an unprecedented method of peristrophic multiplexing by combining the spatial frequency orthogonality with the subwavelength detour phase principle. The orthogonal relationship between the spatial frequency of incident light and the locally shifted building blocks of metasurfaces can be regarded as an additional DoF. We experimentally demonstrate the viability of the multiplexed holograms. Moreover, this newly-explored orthogonality is compatible with conventional DoFs. Our findings will contribute to the development of multiplexing metasurfaces and provide a novel solution to nanophotonics, such as large-capacity chip-scale devices and highly integrated communication.
peristrophic multiplexing metasurface holography 
Opto-Electronic Advances
2022, 6(8): 220141
作者单位
摘要
苏州科技大学 土木工程学院, 江苏 苏州 215011
针对钢结构焊接所产生的残余应变从理论上难以准确计算的问题, 基于光频域反射计(OFDR)技术进行了光纤标定试验和工字钢焊接试验, 研究了该技术在钢结构焊接残余应变监测上的应用。试验与分析结果表明: OFDR技术可以对焊接残余应变实现准确监测, 对应变发生位置可以精确定位。
光频域反射计 分布式监测 瑞利散射 残余应变 模型试验 optical frequency domain reflectometry, distribut 
光通信技术
2022, 46(3): 52
作者单位
摘要
苏州科技大学 土木工程学院, 江苏 苏州 215011
为得到拱桥拱肋在不同受力情况下的应变分布规律, 通过建立有限元模型和采用基于光频域反射(OFDR)的分布式光纤传感技术2种方法研究了不同荷载情况下的拱肋应变分布。结果表明: 在拱肋表面粘贴的基于OFDR的分布式光纤传感器不仅能准确地反映不同荷载情况下拱肋的应变分布规律, 还可以得到拱肋在吊杆损伤前后的应变分布变化, 且能定位吊杆损伤位置。
光频域反射 分布式光纤传感器 拱肋 应变监测 损伤定位 optical frequency domain reflection distributed optical fiber sensor arch rib strain monitoring damage location 
光通信技术
2021, 47(9): 20
作者单位
摘要
苏州科技大学 土木工程学院,江苏 苏州 215011
Ko位移理论能够很精准地对结构进行变形重构,为了将这一理论应用到实际工程中,选用光频域反射(OFDR)分布式光纤传感器作为测量工具,设计了基于等强度梁的变形估算实验方案。实验在等强度梁上分六级加载,用百分表测得4个测点在每级荷载下的真实挠度值,并根据每级所测应变值进行挠度的变形重构,最后将2种方法所得到的挠度值进行对比。实验结果表明:光纤的应变系数为0.71666,变形重构挠度值与真实挠度值之间的最大误差为0.586 mm,符合实验预期。
光频域反射 分布式光纤传感器 标定 应变系数 变形重构 Ko位移理论 optical frequency domain reflection distributed optical fiber sensors calibration strain coefficient deformation reconstruction Ko displacement theory 
光通信技术
2021, 47(7): 53
Author Affiliations
Abstract
1 Nanophotonics Research Center, Shenzhen Key Laboratory of Micro-Scale Optical Information Technology, Shenzhen University, Shenzhen 518060, China
2 e-mail: cjmin@szu.edu.cn
3 e-mail: xcyuan@szu.edu.cn
Polarization imaging finds applications in many areas, such as photoelasticity, ellipsometry, and biomedical imaging. A compact, snapshot, and high-efficiency imaging polarimeter is highly desirable for many applications. Here, based on a single multifunctional geometric phase optical element (GPOE), a new method is proposed for high-efficiency snapshot imaging polarimetry. With tailored spatially varying orientation of each anisotropic unit cell, the GPOE works highly efficiently as both a spin sorter and a half-wave plate, enabling snapshot retrieving of a full Stokes vector of incident light. The designed GPOE is implemented in the form of liquid crystal fabricated with a photo-alignment technology, and its application in imaging polarimetry is experimentally demonstrated by retrieving full Stokes parameters of a cylinder vector beam. This method can also work in the form of plasmonic or dielectric metasurfaces, enabling ultra-compact polarization detection systems by monolithic integration with other devices such as metalenses.
Photonics Research
2019, 7(9): 09001066
Author Affiliations
Abstract
1 Nanophotonics Research Centre, Shenzhen Key Laboratory of Micro-Scale Optical Information Technology, Shenzhen University, Shenzhen 518060, China
2 School of Engineering, RMIT University, Melbourne VIC 3000, Australia
Orbital angular momentum (OAM) mode division provides a promising solution to push past the already exhausted available degrees of freedom available in conventional optical communications. Nevertheless, the practical deployment of OAM within a free-space optical (FSO) communications system is still hampered by a major challenge, namely that OAM-based FSO links are vulnerable to disturbances. Though several techniques, such as using various non-diffraction beams and multiple transmit–receive apertures, are proposed to alleviate the influence of disturbances, these techniques significantly reduce the performance with regard to combating single fading for spatial blockages of the laser beam by obstructions. In this work, we initially demonstrate that a Fabry-Pérot resonant cavity has the ability to implement OAM mode healing, even for a blocking percentage of over 50%. Consequently, the proposed method will expand the use of OAM in the FSO secure communications and quantum encryption fields.
optical communication orbital angular momentum Fabry-Pérot cavity 
Opto-Electronic Advances
2018, 1(5): 180006
作者单位
摘要
1 苏州科技大学土木工程学院, 江苏 苏州 215011
2 江苏省结构工程重点实验室, 江苏 苏州 215011
以桥梁健康监测为目的, 利用自制标距的光纤布拉格光栅(FBG)宏应变传感器测量平均切应变, 识别斜裂缝的出现。以长标距光纤布拉格光栅(FBG)传感器为测量元件, 设计5组交叉拓扑, 利用交叉拓扑理论对混凝土T型梁的不同部位进行了测量, 分析了交叉拓扑覆盖范围内结构的平均切应变与荷载比例关系。结果表明, 长标距FBG交叉拓扑的测量方法能够有效识别斜裂缝的出现与发展, 在工程实际中具有较好的应用价值。
光纤光学 健康监测 平均切应变 交叉拓扑 斜裂缝 长标距 
激光与光电子学进展
2017, 54(12): 120603
作者单位
摘要
装备学院激光推进及其应用国家重点实验室, 北京 101416
针对微推力测量中电容位移传感器需要频繁标定非线性误差的问题, 提出了一种基于激光干涉的现场标定方法。标定原理为: 在直线位移台上同时调节可动角隅棱镜与测量目标的位置, 进而改变干涉光路光程差及电容位移传感器极板间距, 以激光干涉测量结果为基准, 采用线性拟合方法, 对传感器非线性误差进行标定。搭建了基于常用光学元件的干涉光路, 对应用于微推力测量中不同量程的传感器进行标定。在分析干涉光强变化特点的基础上, 确定了干涉条纹数计算方法, 得到干涉光路的位移测量精度为66.5 nm。实验验证了该校准装置的实用性和准确性, 最后对标定结果、传感器输出非线性误差以及影响激光干涉测量精度的主要因素进行了分析, 得到激光干涉测量总误差为67.2 nm。
测量 标定 激光干涉 电容位移传感器 非线性误差 微推力测量 
激光与光电子学进展
2017, 54(10): 101203

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!